Connecter le port JTAG d'Armonie
================================

1. Sur une carte TestAnchor C
-----------------------------

Face supérieure:
              ____________
              |          |_
              | C    uC  |_| <- connecteur USB
Port          |          |
à utiliser -> | B        |
              |__________|


EzUSB board                         PXA 250 Connector

1 (2) GND ------------------\/----- 1 (2) TCK
2 (1) TCK ------------------/\----- 2 (1) GND
3 (3) TDO ------------------------- 3 (3) TDO
4 (5) TMS ----------------------\/- 4 (8) VCC (3.3v)
5 (6) TRST* -------------------\/\- 5 (4) TMS
6 (8) JTAG_RESET* ------------\/\-- 6 (5) TRST*
7 (9) TDI -------------------\/\/-- 7 (9) NOT CONNECTED
8 (4) -----------------------/\/\-  8 (6) JTAG_RESET*
9 (7) EZUSB PWR DETECT--------/\--- 9 (7) TDI
10 (10) --------------------------- 10 (10) GND



2. Wiggler de McGraigor Systems
-------------------------------

Wiggler	PXA250	Name
1 	4 	VCC
3	6	TRST*
5	9	TDI
7	5	TMS
9	1	TCK
13	3	TDO
15	8	RESET*

Wiggler 2,4,6,8,10,12,14,16,18,20: GND
PXA250 2,10: GND

Wiggler 11,17,19: Not connected.
PXA 7: Not connected.